-
NT Labs Narrow pH Test
Water Treatment & Rs. 2,490.00What is pH?
For fish with specific pH requirements or for general tropical community aquaria requiring a neutral pH, the pH 6–7.6 Test provides quick and accurate pH measurement. It also offers precision with 0.2 unit determination.What is the correct pH level?
There is no definitive correct pH as different fish species have their preferred pH range. Generally, the ideal pH value will lie between 7 and 8, but there are some exceptions. When purchasing fish from your local aquatic retailer, always enquire as to the specific water requirements of the fish you are buying.What do I do if the level is wrong?
If you do need to adjust the pH of your aquarium, it is vital to do this slowly to not shock the fish. Change no more than 0.5 pH units per 2 days. Providing your tap water is of suitable pH, substantial water changes can correct a dangerous pH level. It is also important to check the KH of the aquarium. Use of pH adjusters, such as KH Up – pH Stabiliser will raise the pH caused by soft or aged water. For fish that live in soft, acid water use bogwood to gently lower the pH and soften the water.How to use?
- Ensure the test tube is clean.
- Take a 5ml sample of water into the test tube.
- Add 5 drops of the pH reagent; replace the test tube cap and shake thoroughly.
- Compare the colour of your sample to the colour scale provided.
-
NT Labs Nitrate Test
Water Treatment & Rs. 2,490.00What is nitrate?
Nitrate is produced by the beneficial bacteria in the water and filters as they break down the fish’s toxic waste products (ammonia and nitrite). Nitrate is not typically toxic to fish, but excessively high levels (>100mg/l) can cause problems with growth.What is the correct nitrate level?
The level of nitrate is dependent upon a number of factors, including the nitrate level of the tap water (or spring water etc) feeding into the aquarium, the number of fish and the amount of food fed. High nitrate levels will lead to algal growth. A nitrate level of zero is ideal and implies a balance between waste produced by the fish and nutrients taken up by the plant life. Remember: this plant life does include algae.What do I do if the nitrate level is wrong?
Maintenance of a zero level of nitrate is extremely difficult. Most domestic water supplies have a low level of nitrate. The key to maintenance of low nitrates is regular water changes to dilute the build up of nitrate. Also, increasing the higher plant life in the aquarium should use up nitrate. This will lower the amount of nitrate available to algae.How to use?
- Ensure the test tube is clean.
- Take a 5 ml sample of water into the test tube.
- Turn the Nitrate-1 bottle upside down in plenty of light and shake vigorously until there is no sediment on the bottom.
- Add 6 drops of the Nitrate-1 and 6 drops of the Nitrate-2. Replace the test tube cap and shake thoroughly.
- Wait 10 minutes, and then compare the colour of the sample to the colour scale provided. Zero nitrate is represented by a colourless sample. Any hint of pink in the sample indicates the presence of nitrate in the aquarium.
This test kit reports concentration in terms of nitrogen (NO3-N) to be compatible with reported safe concentrations as they apply to fish and plants. If you are interested in knowing the ionic concentration of the measured parameter, multiply your result by 4.43 (NO3-N).
-
NT Labs Nitrite Test
Water Treatment & Rs. 2,490.00What is nitrite?
Nitrite is produced by beneficial filtration bacteria as they break down the harmful waste ammonia excreted by the fish. Like ammonia, it is not visible to the naked eye. Although it is not as toxic as ammonia, nitrite is still very damaging to the health of the fish. Nitrite itself is broken down into nitrate, which is practically harmless to fish.What is the correct nitrite level?
There is no occasion where any nitrite is tolerable in an aquarium. A level of zero mg/L (ppm) should be maintained at all times.What do I do if the Nitrite level is wrong?
If 0.25 – 0.5 mg/l (ppm) of nitrite is found, then add Filter Starter. If a level above this is recorded, then a substantial water change is essential. Change 25% of the water volume for 1 mg/l (ppm) nitrite and 50% for nitrite levels above this. If any level of nitrite is detected Ammonia Remover will remove ammonia (and thus nitrite) from the water and can be recharged. If you do record a nitrite level, then it is important to check other vital water quality parameters, especially pH and ammonia.How to use?
- Ensure the test tube is clean.
- Take a 5 ml sample of water into the test tube.
- Add 5 drops of the Nitrite reagent.
- Replace the test tube cap and shake thoroughly.
- Wait 2 minutes, then compare the colour of the sample to the colour scale provided. Zero nitrite is represented by a colourless sample. Any hint of pink in the sample indicates the presence of nitrite in the water. Any colour forming after the two minutes should be ignored.
This test kit reports concentration in terms of nitrogen (NO2-N) to be compatible with reported safe concentrations as they apply to fish and plants. If you are interested in knowing the ionic concentration of the measured parameter, multiply your result by 3.29 (NO2-N).
-
NT Labs Phosphate Test
Water Treatment & Rs. 2,490.00NT Labs Phosphate Test Contains up to 40 liquid tests! Phosphate is a major nutrient found principally in fish food to help with growth, good bone formation and many other biological processes. However, not all of the phosphate will be utilized by the fish and will be excreted as a waste…
-
NYMPHAEA LOTUS ‘GREEN’
Medium Tech Plants Rs. 250.00Plant info
Type: Bulb/onion Origin: Africa 
Growth rate: Medium Height: 20 – 30+ Light demand: Medium CO2 : Low -
NYMPHAEA LOTUS ‘RED’
Medium Tech Plants Rs. 250.00Plant info
Type: Bulb/onion Origin: Africa Growth rate: Medium Height: 20 – 30+ Light demand: Medium CO2 : Low -
Nymphoides hydrophylla ‘Taiwan Lotus’
Low Tech Plants Rs. 500.00Plant info
Type: Bulb/onion Origin: Asia Growth rate: High Height: 15 – 30+ Light demand: Low CO2 : Medium -
-
-
-
-
Overflow Spiral Flow Mute Silencer 50mm
Aquarium Accessories Rs. 1,500.00- This upper and lower water pipes silencer is suitable for pipeline with the 50mm outside diameter and 2mm~2.4mm wall thickness
- Material: Plastic
- Color: Black
- Length: 24cm /9.45″(appr.)
- Made of plastic material, durable and practical.
Top rated products
-
CO2 Cylinder (Industrial Valve Type)
Rs. 15,000.00 – Rs. 22,500.00
-
Chihiros Z Light TINY
Original price was: Rs. 16,500.00.Rs. 16,000.00Current price is: Rs. 16,000.00.
-
Janeca XP-03B
Rs. 2,100.00
-
Sunsun 304B Rubber O ring
Rs. 2,000.00
-
QANVEE NL-200
Original price was: Rs. 2,300.00.Rs. 1,800.00Current price is: Rs. 1,800.00.
